Mercedes-Benz 2007 CL 550, Руководство оператора

Страница: 194 / 723

193
Control systems
COMAND navigation system (Point of interest entry)
POI list with input characters
1
Top list entry based on the input data
up to that point
2
Characters entered by the user
3
Characters automatically added by the
system
4
Input characters
5
Currently selectable character
6
Currently non-selectable characters
7
POI list
8
Currently selected character
While the characters are being selected as
described below, the top list entry
1
al-
ways shows the POI that best corresponds
to the input data as it has been entered up
to that point.
At the same time, COMAND automatically
supplements characters
2
entered by the
user with appropriate characters
3
.
왘
Selecting characters: Slide
o m p
or
rotate
y m z
.
왘
Confirming character selection:
Press
n
.
왘
Deleting individual characters:
Select
)
in the bottom line and
press
n
.
왘
Deleting an entire entry: Select
)
in
the bottom line and press
n
until the
entire entry is deleted.
왘
Canceling an entry: Select “ Back ” in
the bottom line and press
n
.
or
왘
Press back button
L
in the center
console (
컄
page 82).
As soon as COMAND can clearly attribute
the characters entered to a POI, the input
characters
4
disappear.
You see the POI list without input charac-
ters. Here you can confirm the current en-
try or make another selection.
You can also manually switch to the POI
list without input characters at any time.
왘
Switching manually to the POI list
without input characters:
Slide
q m
.
or
왘
Select
?
in the second line from the
bottom and press
n
.
i
For POIs in other regions, this list also shows
the compass heading to the destination as well
as the linear distance to the destination, as in the
previous illustration.
i
In the list of input characters
4
, you can
only select currently selectable characters.
Which characters are included depends on the
sequence in which you have entered your desti-
nation and the data version of the digital map.