Mercedes-Benz 2007 CL 550, Руководство оператора

Страница: 393 / 723

392
Controls in detail
Automatic transmission
Shifting from D or R to N
If you want to select neutral position N
with the transmission being in drive
position
D or reverse gear R :
왘
With the vehicle at a standstill, depress
the brake pedal and keep it pressed.
왘
Press the handle for electronic parking
brake (
컄
page 384).
왘
Move gear selector lever up to resis-
tance point when in drive position
D or
down to resistance point when in
reverse gear
R to select neutral
position N .
왘
Release the brake pedal.
Shifting procedure
The automatic transmission selects indi-
vidual gears automatically, depending on:
앫
drive position D (
컄
page 393) with
gear ranges (
컄
page 398)
앫
the selected program mode ( C / S )
(
컄
page 399)
앫
the position of the accelerator pedal
(
컄
page 396)
앫
the vehicle speed
With drive position D selected, you can use
the steering wheel gearshift control
buttons (
컄
page 400) to influence trans-
mission shifting by:
앫
limiting the gear range
앫
changing gears manually
i
When the vehicle needs to be moved with
the engine switched off and the transmission set
to neutral position
N ((
컄
page 393), do not press
the handle for electronic parking brake.
!
Allow engine to warm up under low load use.
Do not place full load on the engine until the op-
erating temperature has been reached.
Shift into reverse gear R or park position P only
when the vehicle is stopped.
Avoid spinning of a drive wheel for an extended
period when driving off on slippery road
surfaces. This may cause serious damage to the
drivetrain which is not covered by the
Mercedes-Benz Limited Warranty.