mensor CPC8000, Руководство по эксплуатации

Страница: 34 / 113

High-End Pressure Controller
CPC8000
34 Operating Instructions - CPC8000
6.1.1 Buttons, Keys, Switches, Tabs, and other terms
Many of the words and symbols displayed on screen are active touch points, such that when touched or
pressed something will change if it is an allowable action. In this manual these touch sensitive points are
shown inside brackets such as [Setpoint], the button seen in the upper middle corner of the main screen
(see fgure 6.1.2). These touch points may be referred to as a button, a key (such as a number key), a
toggle switch, a radio button also called a tab. Radio buttons and tabs are mutually exclusive buttons (if
one in a group is chosen the others cannot be selected at the same time). Tabs are radio buttons shown
along the bottom of most screens and they open other screens related to the activity named on the tab or
indicate a selection associated with the active screen.
A touch point will respond with an audible “beep” as a signal of acceptance. A “blap” (error tone)sound is
a signal that an illegal action was attempted, such as a number entry beyond the allowable range.
A word or symbol on a screen which does NOT respond to being touched or pressed is referred to in
this manual as a label, window, monitor or an indicator. A label is merely a bit of information appropri-
ate to the displayed activity, while a window is a variable, usually a numeric value. Also, some screens
will display a line or more of text messages. Labels, windows, monitors, indicators and text are not touch
sensitive.
6.1.2 Map of the Main Screen Features
Figure 6.1.2 is a map of the main screen features and refects a CPC8000 without any of the extra display
options. The map includes a title box for each screen feature and the section number of the explanatory
text about the feature and its use.
AUTORANGE /
RANGE HOLD
(see 6.2.1)
RANGE LIMITS
(see 6.2.10)
PRESSURE TYPE
(see 6.2.13)
PRESSURE UNITS
(see 6.2.12)
BAR GRAPH
(see 6.2.11)
CONTROL LIMITS
(see 6.2.10)
SECONDARY &
TERTIARY DISPLAYS
(see 6.2.9)
SETPOINT ENTRY
METHODS
(see 6.2.6)
ACCEPT ENTRY
(see 6.2.6.1)
ERROR INDICATOR
(see 6.2.8)
SCREEN LOCK
(see 6.2.8)
OPERATING
MODES
(see 6.2.14)
BACKSPACE
(see 6.2.6.1)
DELETE ENTRY
(see 6.2.6.1)
NUMBER KEY PAD
(see 6.2.6.1)
ENTRY LIMITS
(see 6.2.10)
EDIT FIELD
(see 6.2.6.2)
FAVORITES
(see 6.2.7)
SETUP
(see 6.2.5
and 7.0)
SETPOINT
VALUE
(see 6.2.4)
SETPOINT
(see 6.2.3)
PRESSURE
READING
(see 6.2.2)
Figure 6.1.2 - Main Screen Map