mensor CPC8000, Руководство по эксплуатации

Страница: 37 / 113

High-End Pressure Controller
CPC8000
Operating Instructions - CPC8000 37
Figure 6.2.4 - Output Pressure Setpoint
6.2.5 Setup
Press Setup [
] in the sidebar to move out of the main screen and into the setup screens. Notice the
bottom row of six subject tabs and the arrow on the left end of the row (see fgure 6.2.5). Each tab will
bring up a screen relevant to the subject in the tab title.
Figure 6.2.5 – Setup Screen Tabs
After regaining the main screen, the last visited setup screen will return if Setup [
] is pressed again.
Operational information for the setup screens and their associated sidebars is contained in Section 7,
Setup .
6.2.6 Setpoint Entry Methods
Pressing the key pad icon [ ] in the middle of the top row will display the four line menu as shown
below.
Returns the number key pad to the main screen (see 6.2.6.1) .
Sets the setpoint step value (see 6.2.6.2) .
Sets the selected setpoint digit (see 6.2.6.3) .
Activates a program and program control (see 6.2.6.4) .
Figure 6.2.6 - Setpoint Entry Methods