Mendota DT3-PF2-LX, Инструкция по установке и эксплуатации

Страница: 25 / 65

24
2.) PULL
3.) ROTATE
4.) RELEASE
1.) INSERT
DOOR REMOVAL AND REPLACEMENT
CAUTION: Do not operate the appliance with glass removed, cracked or broken. Replacement of the glass should be
done by a licensed or qualified service person. Glass latch tool #HA-57-00743 is supplied with the unit. :
To Unlatch Glass Frame Latches:
1. Insert Glass Latch Tool into hole in latch (two latches exist
at top of glass frame).
2. Pull Glass Latch Tool outward about 3/8”.
3. Rotate Glass Latch Tool 90 degrees.
4. Slowly Release Glass Latch Tool.
5. Remove Glass Latch Tool.
To Latch Glass Frame Latches , reverse steps 5 to 1,
above.
To Remove Glass Frame:
1. Rotate top edge of freed glass frame outward about 15
degrees.
2. Lift Glass Frame Up and Out.
To Install Glass Frame:
1. Align and insert tabs in side flanges of Glass Frame into Slots into the slot in the side bracket.
2. Rotate Glass Frame upward until vertical.
3. Latch Glass in place per instructions above.
GLASS FRAME ASSY.
SPRING LATCH
INSERT
TAB
IN SLOT
DETAIL A