27
Operation and control
The status display shows you which operating mode or operating state the appliance is
currently in. The current operating state is highlighted in colour and indicated by the text
display:
Appliance
is in programme mode
■
Programme is stopped
Appliance is in manual operating mode
The example on the right shows the appliance in man-
ual mode, identified by the coloured hand symbol.
►
When the appliance is in timer mode,
Timer active
is
displayed:
►
When the appliance is in remote control mode, the
symbol appears in the temperature display:
5.4.4 Manual mode
In this operating mode, the appliance runs in permanent
operation at the values set on the ControlCOCKPIT.
Adjustment options
Adjustment options
As described in chapter 5.4.2 , you can set the following
parameters after pressing the corresponding activation key (in any sequence):
Temperature
Temperature
Adjustment range: model dependent (see nameplate and technical
date on page 14)
Heating operation is indicated by the symbol.
symbol.
You can select °C or °F as the temperature unit displayed (see
page 43).
24
.4°C
TEMP
180
.4
°C
Set
Air flap position
Air flap position
Adjustment range: 0 % (closed, recirculating operation) to 100 %
(completely opened, fresh air operation) in steps of 10 %
FLAP
%
40
Fan speed
Fan speed
(only for UF/IF/SF
PLUS
appliances)
Adjustment range: 0 to 100 % in steps of 10%
FAN
%
50
Interior lighting (additional option)
Interior lighting (additional option)
Adjustment range: 0 %, 100 %
LIGHT
%
100
Manual Mode
12.Sept.2012 13:44
Timer active
12.Sept.2012 13:44
23
.2°C
TEMP
Set 180
.0°C
Содержание IF PLUS
Страница 59: ......