Melco EP 1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 34 / 44

6-2
EP 1 Operation Manual Melco Embroidery Systems
General Cleaning
Cleaning the outside surfaces of the machine is not important for operation, but is an aesthetic
consideration. Do not use harsh detergents such as powdered cleansers or “all-purpose cleaners”
for the plastic or painted parts of your machine. Use mild cleaners or a mild detergent soap solu-
tion, along with a soft, clean cloth to wipe the surfaces.
Lubrication
Lubricating the Hook Area
A well lubricated hook assembly is essential for proper operation of the machine. It should be
oiled every day or each time you clean the hook assembly. Make certain that the needle is in
the"up" position.
1. Remove the rotary hook body the same way you would to clean it.
2. Wipe the inside of the hook race body and the outside of the rotary hook body with an oil
cloth. To avoid excessive lubrication, use an oil cloth only.
3. Reassemble the hook assembly.
General Lubrication
CAUTION! Stop the machine before performing any lubrication proce-
dures.
1. Place 1-2 drops of lubricating oil in the throat plate shown in Figure 6-4, once every week.
2. Lift the plastic cap and place 1-2 drops of lubricating oil in the tube shown in Figure 6-5 once
every week. Replace the plastic cap when done.
Figure 6-4 Figure 6-5
1-2 drops of oil
each week in
this hole.
Lift this cap
Place 1-2 drops of
oil into this tube
each week