Melco EP 1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 26 / 44

4-2
EP 1 Operation Manual Melco Embroidery Systems
Enter Key
Used to choose different menu options and to display design information during embroidery. Press
once during embroidery and the stitch count and preset maximum embroidery speed are dis-
played. Press again during embroidering and the design name and present embroidery speed are
displayed.
Alt Key
This key is used only in conjunction with other keys to activate the following options:
[ALT] + [
ñ
] increases the preset maximum embroidery speed while embroidering.
[ALT] + [
ò
] decreases the preset maximum embroidery speed while embroidering, deletes design
files in the Design menu, and allows you to change the machine’s unit number during a hard
reset.
[ALT] + [
ï
] allows you to see the width of a chosen design from the centerpoint.
[ALT] + [
ð
] allows you to see the height of a chosen design from the centerpoint.
[ALT] + [MENU] allows you to move through the operation menus in reverse order.
[ALT] + [ENTER] enables you to “undo” your current menu choice and return to the idle mode dis-
play.
The Light Emitting Diodes (LED)
Two of the control keys, Start and Menu, feature a small red LED in the upper left corner.
The Menu LED will glow to indicate a menu operation in progress.
The Start LED will glow while the machine is embroidering. If the embroidering is stopped (either
manually or due to a thread break) the LED will blink continuously.
The Operation Menus
Design Menu
Press [MENU] until the display reads DESIGN MENU, then press [ENTER]. You can use the [
ñ
] or
[
ò
] keys to scroll through up to 16 different designs sent from the controller computer. If no
designs are present, the display will read NO DESIGNS FOUND.
To select a design that is displayed, press [ENTER]. To delete a design that is displayed, press [ALT]
+ [
ò
], then press [
ñ
] for “yes” or [
ò
] for “no”. If the design is sent from the controller computer
using the Auto Delete feature, it will automatically be deleted at the end of embroidering.