Meister DWG Series, Руководство по эксплуатации

Страница: 8 / 89

Fig. 41: Remove slot nozzle......... 61
Fig. 42: O-ring (seal).................... 63
Fig. 43: O-ring (glass buffer)........ 64
Fig. 44: Position of O-rings........... 64
Fig. 45: O-ring (centering the slot
nozzle)............................. 64
Fig. 46: Insert slot nozzle............. 65
Fig. 47: Centering the slot
nozzle.............................. 65
Fig. 48: Float................................ 66
Fig. 49: Process connection
(Inlet)............................... 66
Fig. 50: Spanner flats................... 67
Fig. 51: Insert the process con-
nection into the device
housing............................ 67
Fig. 52: Secure the process con-
nection (inlet)................... 67
Fig. 53: Align slot nozzle.............. 68
Fig. 54: O-ring, slot nozzle
buffer............................... 68
Fig. 55: Position the outlet
process connection......... 69
Fig. 56: Tighten hex socket
screws............................. 69
Fig. 57: Check for free move-
ment................................ 70
Fig. 58: Loosen female socket..... 70
Fig. 59: Remove the female
socket.............................. 70
Fig. 60: Loosen set screws.......... 71
Fig. 61: Release the guide rail .... 71
Fig. 62: Rotate guide rail to the
side.................................. 71
Fig. 63: Remove switch contact... 71
Fig. 64: Device data plate............ 75
Fig. 65: Switch contact rating
plate................................ 75
Fig. 66: Switch contact rating
plate with positioning
arrow .............................. 75
Fig. 67: Switch contact data
plate................................ 75
Fig. 68: Adhesive label, switch
contact with positioning
arrow .............................. 75
Fig. 69: Replacement parts
drawing............................ 85
03.09.2018
DWG Module BASICS Flow Monitor
8