Meinberg IMS-GNS181, Руководство по установке

Страница: 39 / 53

4.1.3.7 Menu: Setup Meinberg Receiver
Setup MRS
Info REFCLK
->Setup REFCLK<-
Set Outputs
>Antenna Length<
Simulation Mode
Init CLK
Info PZF
->Setup PZF <-
Serial Outputs > Trans.Distance <
Init Time
Ignore Lock
Info TCR
-> Setup TCR <- ->UTC Offset <-
IRIG Code
Initial Time
Ignore Lock
OK
GPS / GLONASS (CLK)
PZF
IRIG
Status
Version
->Tran. Distance<- Setup:
Receiver Position
Tran. Distance
1200km
WWVB, MSF, JJY ...
OK
OK
OK
In the Reference Time -> Setup Clock menu the receiver clock parameters can be configure. The antenna cable
length of satellite based receivers must be entered here. The GPS and GLONASS reference clocks can be run
in simulation mode.
Meinbergs PZF correlation receivers can be operate in simulation mode as well. In addition to that, the
distance to the transmitter must be set in the setup menu.
For our long wave receivers (WWVB, MSF, JJY ...) there is only the setting for "Transmitter Distance" available
- in the Submenu
Reference Time -> Info Refclock . The setup for our IRIG time code receivers includes the
settings for the UTC offset and the corresponding time code. The time code receiver can also operate in simu-
lation mode with
IGNORE LOCK . With Initial Time and Init Clock (GPS, GLONASS), the time and date for
the simulation mode is set.
36 Date: 20th March 2020 IMS-GNS181 Setup Guide