Meinberg IMS-GNS181, Руководство по установке

Страница: 37 / 53

4.1.3.5 Receiver Status and Version
>CLK Status <
CLK Version
CLK Position
CLK Satellites
GPS / GLONASS (CLK)
PZF
OK
->Status <-
Version
Tran. Distance
OK OK
CLK Status
CLK Version
CLK Position
CLK Satellites
> <
CLK Status
CLK Version
CLK Position
CLK Satellites
> <
CLK Status
CLK Version
CLK Position
CLK Satellites
> <
CLKxxx SYNC
OSC warmed up: *
DAC cal:505
DAC val:-24 SN: 029*********
REFCLK vX.XX
OSC: TCXO
EPLD: 002E10CB Receiver Pos.
LAT: 51.9828
LON: 9.2258
ALT: 176 m
Receiver Pos.
LAT: 51°58’57”N
LON: 09°13’32”E
ALT: 176 m
Receiver Pos.
X: 3885662 m
y: 631131 m
z: 5001761 m
SV CONSTELLATION
SVs in view: 10
Good SVs: 10
Sel: 04 10 24 13
OK
OK OK OK
WWVB, MSF, JJY ... (REF)
>Status & Version<
Corr. & Field
PZF STATE
CORR.:
18 State:row
FIELD:0
Status & Version
>Corr. & Field <
PZFxxx SYNC
PZFxxx vX.XX
SN: xxxxxxxxxxxx
TCXO HQ
PZF STATE
CORR.:
1 State:check
FIELD:94
PZF STATE
CORR.:
97 State:fine
FIELD:94
OK
Status
Version
Tran. Distance
-> <-
Status
Version
Tran. Distance -> <-
OK
REF STATE:
State: SYNC
FIELD: 100
REF CLOCK
REF vX.XX
State: SYNC
S/N:001510000000 Setup:
Receiver Position
Trans. Distance
1200km
This first menu will monitor the current state („sync“ or „not sync“). The next line will reflect the firmware
version, the serial number of the internal GPS and the type of the integrated oscillator.
4.1.3.6 Menu: IRIG Receiver State
The first line of the display shows the system state with 8 options - described in the next paragraph. The second
line will display the drift in [us] of the internal oscillator and the TFOM value (Time Figure Of Merit: the qual-
ity of the IRIG-signal, only used with IEEE 1344) and the current system configuration is shown on the third
line. On the fourth line the AGC (Automatic Gain Control of the input signal) value in hexadecimal will be shown.
34 Date: 20th March 2020 IMS-GNS181 Setup Guide