Meinberg IMS-GNS181, Руководство по установке

Страница: 12 / 53

4 GNSS Receiver
4.1 Configuration of IMS Modules via Web Interface
This chapter shows how to configure an IMS GNSS clock-module via the web interface and the display menu
(if available).
4.1.1 Clock
On this page of the web interface, configurations can be made on the respective installed reference clocks or
the changeover card.
Depending on the design of the system, which means whether it is a single reference clock or a system with two
installed remote clocks and a changeover card, the web interface builds up accordingly. This also applies to the
type of reference clock and its options. In case of a redundant receiver configuration the common settings for
"IRIG In/Out", "Serial Ports", "Time Zone", "Enable Outputs", "Programmable Pulses" and "Synthesizers" appears
into the "Switch Card" menu.
Figure: Menu "Clock" in case of a single receiver
IMS-GNS181 Setup Guide Date: 20th March 2020 9