Meiko TopClean M Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 54

Meiko TopClean M Скачать руководство пользователя страница 14

14 / 54

9018116

4.4

Blue operating concept

1 AktivPlus filter

The parts of the cleaning and disinfection machine that must be touched by the op-
erator in operation and in daily use are blue. And so after a short briefing, operators
know intuitively that they have to remove and clean the wash system, tank cover
sieve and filter, for example.

4.5

Detergent and rinse aid

Warning

Risk of injury from contact with chemicals

• Observe the safety data sheets and dosing recommendations of the chemical

manufacturers.

•  Use eye protection.
•  Wear protective gloves.
•  Do not mix different chemical products.

Caution

• Only use products that are suitable and approved for commercial cleaning and

disinfection appliances. Generally, the currently valid documentation of the PPE
manufacturer must be followed when choosing the right cleaning chemicals.
Deviations from this can lead to a loss of product liability.
(Cf. EU 425/2016 - The PPE manufacturer is responsible for releasing the
cleaning and disinfection process and its parameters)

• Do not mix different cleaning products.

The cleaning and disinfection appliance is equipped by default with dosing units for
dosing liquid detergent/disinfectant and rinse aid. Manual dosing with powder
cleaner is not intended.

Approved products:

Rinse aid

(depending on approval from the respective
PPE manufacturer!)

• Etol GT500
• Curacid PSA TC, PICO-Medical

GmbH, Hamburg

Chemical detergent/disinfectant

(depending on approval from the respective
PPE manufacturer!)

• EW 80mat, EW 80 Systeme GmbH,

Dortmund

• Sekumatic® FDR ECOLAB

«
...
12
13
14
15
16
...
»

Содержание TopClean M























































Отзывы:

Нет отзывов