Meiji Techno HD1500MET, Инструкция по эксплуатации

Страница: 5 / 40

5
If get the “No Camera” or “Initialization Failed” error, it could be
the camera is not detected by the PC or the driver is not installed
properly. Please go to Device Manager to check the camera driver
installation status.
ISCapture Parameter Settings
1. Set Auto Exposure . Observe the preview and adjust the
microscope (or lens) to make image in focus.
Normally Auto Exposure function can get proper brightness
preview. If preview is still dark, manually set
Gain to the middle of
the slider.
When get preview in focus, set Gain back to the initial value,
change to Manual Exposure mode and extend the exposure time
manually until get proper brightness images.
2. Click White Balance button to correct image color.