Meiji Techno HD1500MET, Инструкция по эксплуатации

Страница: 30 / 40

30
Click [New] to create a new layer. Allow to key in the preferred
name for the new layer. It uses “Layer02”, “Layer03”... etc as the
layer name by default.
Now loads of measurements can be applied on different layers. It
allows you to choose any layers to view.
Checked [Cur] means the corresponding layer is displayed currently.
Select different [Cur] to switch between different layers. In the
[Visible] column, the selected check box means all the
measurements in the corresponding layers also display on the
current layer. Uncheck the check box, and the corresponding
measurement will be invisible in the current layer