Meicheng IS-LT01, Инструкция по установке и эксплуатации

Страница: 26 / 28

20
Troubleshooting
Problem Possible Cause Solution
Power up but no action or
image
Power supply failure Check power supply
Switch power supply failure Change switch power supply
Power cable is disconnected Reconnect power cable
Self-testing but no image
Video cable is not correctly
connected
Reconnect video cable
Camera is defective Change camera
Self-testing does not
proceed, or with noise
Not enough power Check power cable
Mechanical failure Need repairing
Tracking target not in the
center of image
Pan / Tilt compensation problem
Get into main menu to adjust
pan/tilt compensation parameters
“Tilt logic error” when saving
valid area parameters
Tilt height of 1# preset from
tracking camera is lower than tilt
height of 2# preset
Get into main menu and adjust tilt
height of 1# to be more than 2#
preset
“Zoom logic error” when
saving valid area parameters
Zooming times of 1# preset from
tracking camera is less than
zooming times of 2# preset
Get into main menu and set the
zooming times of 1# preset to be
more than 2# preset.