Meicheng IS-LT01, Инструкция по установке и эксплуатации

Страница: 14 / 28

Menu Operations
8
Start Up Information
After the camera is powered up, the tracking camera will do self-testing by its pan and tilt direction,
then reaches its preset number 1. Before the tracking camera reaches preset number 1, the aux
camera will pop-up below window. After tracking camera reaches preset number 1, it will start auto
tracking. If moving object appears in the scene, there will be red rectangular frame around the
moving object.
Camera Control
Our keyboard controller, remote controller, other PC based control software or any other
controllers can be used to control the camera. However, address, baud rate and protocol from
controller should be set exactly the same as the camera’s actual settings.
Below Chart shows the available presets and their relative functions for camera control and value
settings.
Presets & Functions
Preset Function
1 starting tracking position
2 Closest tracking position
3
Close-up tracking position, work with ultrasonic
locator
4-64 Regular preset positions
80 Call this preset to start auto tracking
81 Call this preset to stop tracking
83 Auto iris mode
Address: 1, Pelco-D, 9600
Call 80# to begin tracking
Call 95# to set parameters
Ver 1.4