Meicheng IS-LT01, Инструкция по установке и эксплуатации

Страница: 12 / 28

6
Installation Instructions
Camera Pole Mount Installation Steps
Before installing, locate correctly the position of the pole according to its horizontal angle; make
sure the aux camera is pointed directly to the blackboard.
Pole bracket installation
Pull the aviation plug through the pole bracket; reserve enough length of cable outside the pole
bracket that is used for further installation; then, according to hole dimension of the fixing plate, fix
the pole bracket, by using setscrews, onto the ceiling.
Pole base installation
Pull the aviation plug through the pole base, then fix the pole base and pole bracket by the screw
thread.
Cable connection
After fixing the pole bracket, connect the aviation plug to the related interface at the camera base.
Make sure to connect correctly, and then tighten it.
Camera Installation
Fix the three bolts at the camera base to the pole base’s three holes, and then tighten it.
Then screw up the two bolts from the pole base to the camera base, fix the camera’s horizontal
position. Finally the installation is finished as below picture.
[Note]
Make sure the aux camera is pointing directly to the blackboard; otherwise,
adjustment to the pole position is required to reposition.
[Note]
must fix tightly to ensure safety.