Meicheng IS-LT01, Инструкция по установке и эксплуатации

Страница: 25 / 28

19
Menu Operation
Anti-projector interference function (Open / Close)
To open anti-projector interference, set the bottom boundary of the projection area higher than the
bottom boundary of valid tracking area, Set
Start/Stop Tracking
preset 96 to save setting.
To close it, set the bottom boundary of the projection area lower than the bottom boundary of valid
tracking area, then the camera will figure out that there is no projection area and the anti-projector
interference function will be closed.
The anti-projection interference function is closed in default setting.
After powered up, the camera automatically starts tracking.
Call preset 81 to stop tracking.
Call
Menu is only accessible in non-tracking mode; and tracking can only be activated after existing
menu.
preset 80 to start tracking.
[Note]
the area can be set according to the actual projection area in the projection screen,
no need to cover the whole screen.