Megger TM1800, Руководство пользователя

Страница: 62 / 104

62
TM1800 ZP-CG01E CG0757JE
6 CABA LOCAL
2]
Enter the calibration values in the fields
shown in the upper right corner. For quick
navigation between the fields use the arrow
buttons next to it.
3]
Type in a significant name for the transducer
into the “Transducer ID” field.
4]
Press the “BACK” button to leave this screen.
Calibrating 4 - 20 mA motion transducers
1]
Press the “Transducer type” button repeat-
edly to select the option “4 - 20mA”. The
following screen appears.
2]
Enter the calibration values in the fields
shown in the upper right corner. For quick
navigation between the fields use the arrow
buttons next to it.
3]
Press the “Supply” button to select the pow-
er supply for the transducer, “10V” or “24V”.
4]
Type in a significant name for the transducer
into the “Transducer ID” field.
5]
Press the “BACK” button to leave this screen.
Defining pressure transducers
1]
Press the “Pressure” button on the “DEFINE
NEW TRANSDUCER” screen.
Calibrating pressure transducers can be done in two
different ways:
A]
Manual. Enter all values (pairs of pressure &
voltage or current value) manually.
B]
Using TM1800 readings as reference.
Enter pressure value manually while using au-
tomatic TM 1800 voltage or current reading
A. Manually calibrating a pressure
transducer
1]
Select the appropriate transducer output
type and if needed the power supply by
pressing the “Output/Supply” button repeat-
edly.
2]
Press the “Calibrate” button. The following
question appears.
3]
Press the “NO” button. The following screen
appears.