manualshive.com logo in svg

Megger TM1800, Руководство пользователя

Поделиться
Скачать
Megger TM1800 Скачать руководство пользователя страница 39

CG0757JE

ZP-CG01E

TM1800

39

6 CABA LOCAL 

6.4 Main and submenus

There are six main menus (3), each having several 
sub menus in a tree structure. The top left and right 
navigation buttons are dedicated to move between 
the main menus.

Moving between the main menus does not affect the 
state of how it is displayed.  The chosen sub menu 
will always remain despite moving to other main 
menus. Example: If you go from one main menu, also 
showing submenu, to another main menu and back 
again, the first main menu will look the same as it was 
before you left it, with the submenu.

Selected items bar

The selected items bar (5) shows the selected tem-
plate or breaker and is useful when moving between 
the sections. If no item is selected the bar displays: No 
Breaker or Template Selected.

6.5 Repair CABA Local

If you are experiencing problems with your TM1800 
that could be software related there is an option to 
repair the system. The repair reinstalls the original 
TM1800 system files without removing any existing 
measurements (breakers in breaker list). you can initi-
ate a repair with the following procedure:

1] 

Turn off the TM1800.

2] 

Turn on the TM1800 and then directly press 
and hold the “Ctrl” key on the keyboard 
until  message “Repair started, please wait 
while restoring TM1800 system” is shown in a 
command window named  “TM1800 Startup 
Manager”. (This will take a few minutes).

3] 

Wait while your TM1800 software files are 
updated.

4] 

When asked to “Close the following applica-
tions before continuing the install” choose 
“Ignore”.

5] 

Click “OK” when informed “TM1800 Setup 
completed successfully”.

6] 

Click “Yes” when prompted to restart.

Done! you have now repaired your software.

If the problems still remain – contact  the Megger sup-
port team.

Содержание TM1800









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды