M
MPQ1000-UG-EN Rev 6 April 2020
60
Starting a Recording
Once the connections are verified, press the RECORD button to start the recording.
The analyzer will verify the inputs and settings before starting the recording. The
analyzer will verify the following:
The default frequency is correct.
The inputs are correct for the power parameters selected.
The current clamps are set to the proper range.
The phase angles are correct for the configuration selected.
If any of the above is found to be incorrect the analyzer will display a message. The
message will indicate what parameters and channel is incorrect and how to correct it.
NOTE:
If the range setting on the CT does not match the range in the setup file then the
analyzer will display a message indicating the CT channel that is set incorrectly.
The operator has the option to do the following:
Manually change the range on the CT to the correct range.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
