MPQ1000 Operation
MPQ1000-UG-EN Rev 6 April 2020
31
3.
Use the
UP /
DOWN and ENTER
keys to scroll down and select the
desired selections.
From this screen the user can select the following:
1.
Change the Voltage and Current Trace colors. (These can be matched to local
standards)
2.
Click in the SCOPE field to open the drop down menu. This will allow you to select
the screen to which the SCOPE shortcut key will default.
3.
Click in the DMM field to open the drop down menu. This will allow you to select
the screen to which the DMM shortcut key will default.
4.
Click in the LINE WEIGHT field to open the drop down menu. From here you can
change the line weight of the traces on the charts..
5.
Click in the GRID LINE field to enable or disable grid lines on the charts displayed
on the unit.
6.
Change the Auto shutdown time (in minutes). The analyzer will shutdown after this
amount of time providing the analyzer is NOT powered from its AC adapter and the
analyzer is NOT recording.
7.
Select CT Prompt. If disabled then the MPQ analyzer will view the range setting of
each CT and automatically adjust the setup file to that range. If enabled then the
MPQ will read the range of each CT and if it does not match the CT setting in the
setup file it will notify you before changing any settings.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
