MPQ1000-UG-EN Rev 6 April 2020
59
9
Starting and Stopping a Recording
Before starting a recording is best to verify the current clamps are set to the proper range
and the analyzer is connected properly.
Verify the Input Connections
Before starting any test, verify that you have hooked up all the inputs required for the
active setup program. Press the DMM short cut key to enter the DMM mode. You can
then view all voltage and current values the unit is connected to.
Use the arrow keys to scroll over to the POWER selection. Verify the KW
measurements are positive. If they are not then a current probe may be backwards.
Verify the voltage and current phase angles are correct for the active setup file.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
