Starting and Stopping a Recording
MPQ1000-UG-EN Rev 6 April 2020
61
Have the analyzer automatically change the range in the setup file to match the range
setting on the CT.
Ignore the mismatch.
Please note: if this option is chosen the current values recorded will be
incorrect.
The analyzer will check the CT ranges for each channel individually. Therefore it is
possible to get the same message 3 times. Each message will display a different channel.
Once the analyzer determines the configuration is correct it will start the recording and
the following screen will appear.
This screen will display the
Duration of the Recording, the Time Remaining, the Voltages and
Currents
as well as any events that have been captured.
During the recording the mode the analyzer does not display scope mode functions.
The user can use the arrows to scroll over to POWER to view the power and energy
parameters during the recording.
To stop the recording, press the RECORD key again.
If the display on the analyzer is off, pressing the RECORD key will first turn on the
display.
Press the RECORD key a second time to stop the recording.
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30