www.megger.com
DLRO10 and DLRO10X
24
11. REPAIR AND WARRANTY
The instrument circuit contains static sensitive devices, and care must be taken
in handling the printed circuit board. If the protection of an instrument has been
impaired it should not be used, and be sent for repair by suitably trained and qualified
personnel. The protection is likely to be impaired if, for example, the instrument
shows visible damage, fails to perform the intended measurements, has been
subjected to prolonged storage under unfavourable conditions, or has been exposed
to severe transport stresses.
New Instruments are Guaranteed for 1 Year from the Date of
Purchase by the User.
Note: Any unauthorised prior repair or adjustment will automatically
invalidate the Warranty.
11.1 Instrument Repair and Spare Parts
For service requirements for Megger Instruments contact:-
Megger Limited
Archcliffe Road
Dover
Kent, CT17 9EN.
England.
Tel: +44 (0) 1304 502100
Fax: +44 (0) 1304 207342
Megger
Valley Forge Corporate Centre
2621 Van Buren Avenue
Norristown, PA 19403
U.S.A.
Tel: +1 (610) 676-8579
Fax: +1 (610) 676-8625
or an approved repair company.
11.2 Approved Repair Companies
A number of independent instrument repair companies have been approved for repair
work on most Megger instruments, using genuine Megger spare parts. Consult the
Appointed Distributor / Agent regarding spare parts, repair facilities and advice on the
best course of action to take.
11.3 Returning an Instrument for Repair
If returning an instrument to the manufacturer for repair, it should be sent freight pre-
paid to the appropriate address. A copy of the Invoice and of the packing note should
be sent simultaneously by airmail to expedite clearance through Customs. A repair
estimate showing freight return and other charges will be submitted to the sender, if
required, before work on the instrument commences.
NOTE: The batteries are Li-ion and disposal of cells should be in accordance
with local regulations.
11.4 Declaration of Conformity
Hereby, Megger Instruments Limited declares that radio equipment manufactured
by Megger Instruments Limited described in this user guide is in compliance with
Directive 2014/53/EU.
Other equipment manufactured by Megger Instruments Limited described in this user
guide is in compliance with Directives 2014/30/EU and 2014/35/EU where they apply.
The full text of Megger Instruments EU declarations of conformity are available at the
following internet address: megger.com/eu-dofc.
11.5 End of life disposal
11.5.1 WEEE
The crossed out wheeled bin placed on the Megger products is a reminder not to
dispose of the product at the end of it’s product life with general waste.
Megger is registered in the UK as a Producer of Electrical and Electronic Equipment.
The Registration No is WEE/HE0146QT
11.5.2 Batteries
The crossed out wheeled bin placed on the batteries is a reminder not to dispose of
them with general waste at the end of their life.
This product contains Li-ion batteries.
Battery replacement should only be performed by a Megger authorised repair agent,
who will correctly dispose of the spent battery.
