www.megger.com
DLRO10 and DLRO10X
11
4.9 Set Clock
This option sets the real time clock date and time settings as well as setting the date
format. When you enter this screen the current date, time and date format will be
displayed.
Use the cursor control Up and Down arrows to adjust the highlighted data. Step to
the previous/next item by using the Left/Right cursor control arrow.
The date is only available as a four digit year. The time is only available in 24h
notation.
The lower YY/MM/DD shows the current date format. Pressing the cursor control Up
arrow will cycle through the available options DD/MM/YY, MM/DD/YY or YY/MM/DD.
The bottom line shows the current setting of date and time. This is updated when you
press Enter to exit the Set Clock function. Tests already stored prior to changing the
date format will change to the new format.
4.10 Delete Data
Select Delete Data if you wish to clear DLRO10X’s memory of stored data. In case you
have selected this Option by accident you will be asked to confirm that you wish to
delete the data; the default is NO. Change this to YES and press Enter if you wish to
delete all data.
Please note - ALL stored data will be deleted.
4.11 Storage
The Storage option sets the default for data storage. It may be set to always store
data or never to store data. Highlight the desired option at the bottom of the screen
and press Enter.
With the exception of tests carried out in Continuous mode, at the end of each test
you have the option to change the default by selecting STORE or NO STORE at the
bottom of the results screen.
At the end of a test, if memory is full this STORE / NO STORE message will change to
MEMORY FULL and no more tests will be stored.
Data is stored indefinitely if a charged battery pack is fitted. If the main battery
becomes exhausted or is removed, data is maintained for a period of 4 days by an
internal backup battery. When a charged battery pack is refitted, the backup battery
will recharge to full capacity within 1 week.
