Megatron UP-PN-II, Руководство пользователя

Страница: 8 / 36

UP-PN-
II
v0.8 8
Chapter 2 Installation and Operation
2.1 Installation
Overview of the UP-PN-II dot matrix printer is shown figure 2-1:
2.2 Connecting the power
Mains version:
the printer is not equipped with a battery
A DC power plug is delivered (6VDC/5A).
Battery version:
A rechargeable battery is delivered with the printer with a
mains charger. When the charger is connected, the charge begins for 14 hours.
After the first use, we recommend to charge the battery.
Installation of the battery: clip the battery in the case below the printer.
You can hear a sound.
Removing the battery: press on the plastic bar which is near the battery.
(fig 2.2)
An external charger can be use for fast charging.
Shut off the printer and remove the battery pack
then connect the battery pack to the external
charger.
Warning: The printer can't work if a battery is
not connected.
Figure 2-1 overview of UP-PNII
Bottom case
IrDA window
Output of
paper
ON/OFF
Button
LF button (line
feed)