manualshive.com logo in svg

Megatron UP-PN-II, Руководство пользователя

Поделиться
Скачать
Megatron UP-PN-II Скачать руководство пользователя страница 26

                                    UP-PN-

II

 v0.8                                26 

4.5.6 L

OGO

 & M

ESSAGES

 

 

A bank of 16 ko flash is reserved for the downloaded messages. 
This bank can be used for : 
           - storage of a unique logo (or a large 16 k message) 
           - storage of 3 messages of 4 ko that can be printed by interface or timer. 
These 2 modes can’t be mixed. 
 

Logo: 

if the 2 first bytes of the memory bank are >=0 and < 16382, the logo 

mode is active and the 16382 following bytes contain the data of the logo. 
The logo can be activated by : 
           - a software control code (GS p) 
           - the timer (if running) 
           - the end of form when the mode “Logo stamp” is active. 
 

Messages: 

if the 2 first bytes of the memory bank are 0, the mode “messages” 

is entered. 
The memory bank is then divided into 4 banks of 4 Kbytes. 
           - The first one, 0 is always left empty. 
           - The banks 1,2,3 contain the data of the messages. These messages are 
printed out by the software control code (GS m), or at the power up, by the timer, 
or by the mode “Info stamp” according to the message. 
           - Message 1 : initialization message. It is activated once at the power up of 
the printer. The usually font in is to print a header, or to initialise an external 
equipment. 
           - Message 2 : Main message. It is activated by : 
                      - GS m 2 
                      - timer, if it is activated. 
                      - the end of paragraph when mode “Logo Stamp” active. 
           - Message 3 : Alt message. It is activated by : 
                      - GS m 3 
                      - timer 

⊗

A software is available on our internet site. This software is 
intended to help you for design and download messages. 

 

Содержание UP-PN-II





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды