Megatron UP-PN-II, Руководство пользователя

Страница: 13 / 36

13 UP-PN-
II
v0.8
UP-PNII has two buttons « ON » « LF » (see fig 2.8)
(1) Power on : Press ON button. The red light blinks.
(2) Shut off : Auto after a delay of inactivity (1 up to 15 min), or press « ON » for 5
sec. When the 2 lights blink, release the button. The printer shuts off. You can
inhibit the auto shut off with the menu « Advanced -> Power OFF -> Manual »
(3) Autotest: when the printer is off, press and maintain LF, then press ON. When
the print begins, release the buttons. The printer prints a ticket with the
current parameters.
(4) Hex dump : when the printer is off, press and maintain LF, then press ON.
When the print begins, maintain the LF until the message « DUMP HEXA
MODE » appears on the paper. Then release LF. The printer is now printing
the received datas in Hex format.
(5) Line feed: when the printer works, press LF and the paper goes ahead.
(6) When the printer is on, press simultaneously the two buttons : The menu is
entered.
ON button
Green light
LF button
Red light
Figure 2-8 Lights & buttons
2.7 Play with buttons & leds
UP-PNII has two leds :
•
The green one « POWER » blinks when then printer is working
•
The red one « FAULT » blinks in case of errors (see table 2.7)
(
on – off ).
Table 2-7 Error indicator
Meaning
Normal
Paper end
Print Head fault
Battery low
Red led System
No
No
Yes
Yes
Memory fault
Yes