Megatron UP-PN-II, Руководство пользователя

Страница: 23 / 36

23 UP-PN-
II
v0.8
4.5.3 H
ORIZONTAL SPACES
•
TAB (09 Hex = 9 Dec)
Tabulation
Move the next printing position to the next tabulation.
•
ESC D x1...xi NUL (1B 44 ... 00 Hex = 27 68 ... 0 Dec)
Tabulations setting.
You can define as many tabulations positions xi than the number of
characters that can be defined in the line of characters. This command must
end with the NULL character (00 Hex).
By default, tabulations are positioned every 6 characters in 6, 12, 18, etc...).
This value can be changed by the configuration menu
4.5.4 V
ERTICAL SPACES
•
LF (0A Hex = 10 Dec)
Starting a new line.
The LF (LineFeed) and CR (Carriage Return) characters act the same way by
triggering the printing of the current line. Some word processing softwares
use LF, others CR and a few others both commands to trigger a line printing.
In order to avoid non required double interline spacing, in case a sequence
including these two consecutive characters is received, only the first character
received will trigger the printing, the other one will be ignored.
•
FF (0C Hex = 12 Dec)
Starting a new page. See ESC C command
•
CR (0D Hex = 13 Dec)
Carriage return.
Starting a new line. See LF command above.
•
ESC ) n (1B 29 Hex = 27 41 Dec)
Advancing for n character lines
•
ESC 1 (1B 31 Hex = 27 49 Dec)
No effect. For compatibility with UP-PN version 1.
•
ESC 2 (1B 32 Hex = 27 50 Dec)
Return to the default space beetween the lines. (default value = 0)
•
ESC 3 n (1B 33 Hex = 27 51 Dec)
Setting the space beetween two character lines to n dot lines
•
ESC C n (1B 43 Hex = 27 67 Dec)
Setting the page length in lines of characters.
The default value is 10. It can be change by the configuration menu
•
ESC J n (1B 4A Hex = 27 74 Dec)
Advancing for n dot lines