Megatron UP-PN-II, Руководство пользователя

Страница: 15 / 36

15 UP-PN-
II
v0.8
Q
UICK
E
XPLANATION OF PARAMETERS
:
•
Set Clock:
(non available, for future option)
•
Printer:
⇒
Interface IrDA or RS232 or USB 2.0
⇒
Font: 2 fonts
⇒
Direction: Sets the direction of the printing (text or data).
⇒
Nat. Chars. Choice of national characters. This is useful for the accent
characters when 7 data bits.
⇒
Width: Default width of characters.
⇒
Height: Default height of characters.
⇒
Page Length Default page length in lines
⇒
Tab Length Default character number between 2 tabulations
⇒
GR Hor_Res Zoom factor in graphic mode
•
Serial and Ser9600:
⇒
Baud: from 110 baud to 19k2 baud
Always 9600 Baud with Ser9600 Menu
⇒
Databits: 7 or 8
⇒
Parity: None, Odd, Even
⇒
Xon: Quantity of XON transmitted at the power on
- Single XON
- Repeat XON (every 300 ms)
•
Advanced :
⇒
Compatible: ESC/P 9Pins, ESC/P Basic, ESC/P Cust, PCL Raw
⇒
Paper end: In case of paper end, the printer can :
if 'Set Busy', stops the printing and sets RTS.
if 'Fill Buff.', stops the printing, and continues to accept datas until the
buffer is full.
if 'Ignored', continues to print even there is no paper at all.
if 'Warn Host', warns the host and continues the printing
Notes: paper fault :
The modes 'Set Busy', 'Fill Buff.' et 'Warn Host'
warn the host by sending the character EM
(19h)
. When fault is cleared,
the printer sends ETB
(17h)
Head fault :
Printer sends the character DC2 (18h), sets RTS=BUSY
and sends XOFF). In this case, verify the head (paper jam). A push on
LF may help to reactivate the head. When the fault is cleared, the
character DLE (16h) and XON are emitted, RTS remains to FREE.