Megalarm MEGA 250, Руководство по установке

Страница: 13 / 20

Some Vehicles have a special “COMFORT feature”. When you lock the door with the key, you just have to
keep on turning the key on the door about 5 or 7 seconds and the window will close directly.
If your vehicle with “COMFORT feature” and you wish the door being locked and the window being closed
automatically at the same time by remote control, you can set the alarm feature
II-1 “with comfort feature”.
REMOTE START FEATURE PROGRAM MODE.
START FEATURE “
I
” PRORAMMING:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch
8 times and holding in on the 8
th
push until Four chirps with a long chirp is
hearing and the LED start to flash then release the valet switch. You are now in the Start feature ‘I’
programming mode.
3. Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
T
ransmitte
r
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulse Three Chirps /
LED three pulse
Four Chirps /
LED four pulse
1
Gasoline Engine Diesel Engine and
10 seconds warn-up
timer Diesel Engine and
15 seconds warn-up
timer Diesel Engine and
20 seconds warn-up
timer
2
10 minutes run time 20 minutes run time 30 minutes run time 5 minutes run time
3 Factory alarm
disarm with channel
3 on Without this feature
4 Constant parking
light output Flashing parking
light output
5
+
Press
-
button = Activate
Remote Start.
Press
+
button = Activate
Remote Start.
Press button =
Activate Remote
Start.
The Vehicle has
aftermarket Turbo
timer installed:
The system Can be
Lock / Unlock with
the engine running. Built-in Turbo Timer
Control is Active:
Press
and
buttons at the same
time to control
Engine running one
minute.
Built-in Turbo Timer
Control is Active:
Press
and
buttons at the same
time to control
Engine running
three minute.
6
+
The Vehicle without
Turbo Mode (The
system Can not be
Lock / Unlock with
the engine running.)
Five chirps = Built-in Turbo Timer Control is Active / Press and
buttons at the same time to control Engine running five minutes.
7
+
3 Hour Time start 2 Hour Time Start
Exit
: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps & 3 parking light flashes to
confirm exit.
SAFE START (Child safety mode)
Factory defaults setting to press the button twice to start the vehicle.
Programming this feature to eliminate an accidental remote start, when kids enter this transmitter, it
requires: The user presses the transmitter
and buttons at the same time to start the vehicle.
START FEATURE “
II
” PRORAMMING:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch 10 times and holding in on the
10
th
push until five chirps with a long chirp is
hearing and the LED start to flash then release the valet switch. You are now in the Start feature ‘II’
programming mode.
3. Press and release the transmitter button ‘A’ corresponding to the feature ‘A’ you want to program.
Press
T
ransmitte
r
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulse Three Chirps /
LED three pulse
Four Chirps /
LED four pulse
1
Exit the programming mode. (3 long chirp & 3 parking light flashes to confirm this exit.)
2
+
Engine Checking
TACH. Engine Checking
Voltage Engine Checking
OFF
MEGA 250 INSTALL 13