Medrad AngioJet Ultra, Руководство по эксплуатации

Страница: 7 / 16

A thorough understanding of the Ultra System components is required for
proper operation. Read this manual and the Information for Use supplied with
the Thrombectomy Set before attempting to use any of the components of
the Ultra System.
Improper Ultra System preparation or abnormal component operation
will result in error messages. Please refer to
Section 7.5 - Alarms and Error
Messages
of this manual for instructions on what to do if error messages are
displayed.
Figure 3 – Control Panel with Labels
Time Display:
During catheter priming, the time display counts
down to
zero. During the procedure, the time display
counts up from zero.
Icons:
Display the progress of set-up and operation steps and also indicate
when an alarm or Ultra System error has occurred.
-Please Wait.
-Install Pump.
-Connect Saline.
-Prime Catheter.
-Ultra System Ready.
-Contact MEDRAD Technical Support.
6
7. CLINICIAN USE
INFORMATION
Time
Display
Counter Reset
Button
Power
Button
Catheter
Identification
Button
Alarm Reset
Button
Icons
Status Panel
Scroll Buttons