background image

6

MAINTENANCE & TROUBLESHOOTING

No daily maintenance is required. It is intended this equipment should 

only be serviced by qualified and authorized technical personnel. Please 

contact your Medline representative if the below troubleshooting  

solutions do not work.

WARNING:

 Disassembly or attempts to make repairs may void  

Manufacturer’s Warranty. Please consult the Statement of Warranty in 

this Manual for more information.

If the problem is not resolved, please contact your Medline representative.

Fault/Problem

Description

Possible Root Cause

Solution

The Air Blower does 

not turn on.

The Air Blower is not receiving 

power.

Check power cord plug is securely 

connected and fits snugly into the 

outlet. Secure plug connection and 

turn on Air Blower power switch.

Blown fuses in pump and plug.

Check for blown fuses in pump and 

plug. Replace fuse if blown.

Power outlet is faulty.

Try another power outlet.

Defective Air Blower Unit.

Replace with new device. 

Contact your Medline 

representative.

The Comfort Glide 

Repositioning Sheet 

cannot be inflated.

Hose not properly connected.

Verify that the hose is properly con-

nected to the Air Blower. The hose 

has 2 prongs that snap into place to 

connect it to the Air Blower unit.

Air Flow is not sufficient.

1.     Check hose connection points 

and re-connect if needed.

2.    Check hose for tears or kinking.

3.    Check for punctures or rips in 

the Comfort Glide Air Sheet.

4.    Check the air filter for re-

strictions. Clean/replace as 

necessary.

Содержание ComfortGlide

















Отзывы: