13
Manufacturer’s declaration – electromagnetic immunity
The
Comfort Glide Air Blower
is intended for use in the electromagnetic environment
(for professional healthcare) specified below. The customer or the user of the
Comfort Glide Air Blower
should assure that it is used in such an environment.
Immunity
test
IEC 60601 test level
Compliance level
Electromagnetic environment-guidance
(for professional healthcare environment)
Conducted
RF
IEC 61000-
4-6
Radiated
RF
IEC 61000-
4-3
3 Vrms:
0,15 MHz – 80 MHz
6 Vrms:
in ISM bands between
0,15 MHz and 80 MHz
80 % AM at 1 kHz
3 V/m
80 MHz – 2,7 GHz
80 % AM at 1 kHz
3 Vrms:
0,15 MHz – 80 MHz
6 Vrms:
in ISM bands between
0,15 MHz and 80 MHz
80 % AM at 1 kHz
3 V/m
80 MHz – 2,7 GHz
80 % AM at 1 kHz
Portable and mobile RF communications
equipment should be used no closer to
any part of the
Comfort Glide Air Blower
including cables, than the recommended
separation distance calculated from the
equation applicable to the frequency of the
transmitter.
Recommended separation distance:
d = 1,2
d = 1,2 80 MHz to 800 MHz
d = 2,3 800 MHz to 2,7 GHz
Where P is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter manufacturer
and d is the recommended separation
distance in metres (m).
Interference may occur in the vicinity of
equipment marked with the following
symbol:
NOTE 1:
At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2:
These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
WASTE DISPOSAL
This Product has been supplied from an environmentally
aware manufacturer that complies with the Waste Electrical
and Electronic Equipment Directive (WEEE).
This product may contain substances that could be harmful
to the environment if disposed of in places (landfills) that are
not appropriate according local regulations. Please be
environmentally responsible and recycle this product through
your recycling facility at its end of life.
