
U
SER
M
ANUAL
&
T
ECHNICAL
D
ESCRIPTION
N-LINEpro_User Manual_2018-09-20.doc
MEDlight GmbH
Werrestr. 94
32049 Herford
Germany
Phone: +49 5221 99429-0
Fax: +49 5221 99429-40
e-mail: [email protected]
www.medlight.eu
Page 15 of 30
3.3.4
Set Dose Units
In this menu, you can set the desired
dose unit for each available UV tube
type. To do this, select J/cm² or
mJ/cm² from the corresponding
dropdown menu.
3.3.5
Dose Limits & Dose Warnings
To avoid the accidental input of
excessive doses, the device has
adjustable dose limits. The maximum
dose limit for UVA is 12.0 J/cm² and
for UVB 6.0 J/cm². To change these
values according to your requirements tap on the corresponding D
OSE
L
IMIT
input field and enter the
desired dose limit.
As an additional safety measure, a
DOSE WARNING
threshold can also be set in the correspondingly
marked input field. In this case, a warning message will appear on the screen as soon as a dose is
entered that is equal to or greater than the value set for the dose warning threshold. The dose can still
be used, but the user must confirm the message so that entering a higher dose becomes a conscious act.
3.3.6
Assigning a Cabin Identifier
In particular, if more than one cabin is operated, it makes sense to assign an identifier to the cabins in
order to avoid confusion of the devices. Do this, tap the input field C
ABIN
I
DENTIFIER
and enter a unique
name for the device using the on-screen keyboard. If the cabin is used in conjunction with the SKINdex
software, the assigned name automatically appears in the SKINdex software as well.
3.3.7
Set PIN Code
To prevent unauthorized use of the
cabin, as well as changes to the
E
XTENDED
S
ETTINGS
menu, a PIN code
should be set. Press the S
ET
button
below the text PIN
Q
UERY
to open the
corresponding menu. Select the
conditions for which you would like a
PIN query by tapping the appropriate
button. Then press the
CHANGE
PIN
CODE
button, enter the desired PIN and
confirm with the enter key (
). To
ensure that the desired PIN was
entered correctly, you must enter the
PIN a second time and confirm again with Enter. By pressing the OK
button, your PIN settings become
active and the menu closes.