U
SER
M
ANUAL
&
T
ECHNICAL
D
ESCRIPTION
N-LINEpro_User Manual_2018-09-20.doc
MEDlight GmbH
Werrestr. 94
32049 Herford
Germany
Phone: +49 5221 99429-0
Fax: +49 5221 99429-40
e-mail: [email protected]
www.medlight.eu
Page 12 of 30
via pre-set therapy steps. For this
input option, swipe from right to left
across the screen or tap on the
T
HERAPY
S
TEPS
menu tab. The twelve
pre-set dose values in this menu can
also be individually adapted to your
needs (see section 3.3.8). Select the
desired dose by tapping on the
corresponding field, then press the
C
ONTINUE
button to confirm the
selection.
However, if you prefer to enter an
exposure time instead of a dose, swipe
again from right to left across the
screen, or tap the T
IME
E
NTRY
menu
tab.
Tap on the input field and enter the
desired treatment time in minutes and
seconds via the on-screen keyboard
and press the enter key (
). The dose
that corresponds to the set treatment
time is displayed below the input field.
To confirm the entered treatment
time and to go to the next program
step, press the C
ONTINUE
button.
3.2.4
Ready State
The cabin is now ready for treatment.
Before the therapy is started, check in
this menu again the correctness of
your
previously
set
therapy
parameters. In case that a correction is
required, press the arrow
button
←
to
return to the previously described
menu. However, if all entries are
correct, the patient can now enter the
cabin. Please read section 7.1
T
REATMENT
I
NSTRUCTIONS
before you
press the S
TART
button to start the
therapy and switch on the UV tubes!