
U
SER
M
ANUAL
&
T
ECHNICAL
D
ESCRIPTION
N-LINEpro_User Manual_2018-09-20.doc
MEDlight GmbH
Werrestr. 94
32049 Herford
Germany
Phone: +49 5221 99429-0
Fax: +49 5221 99429-40
e-mail: [email protected]
www.medlight.eu
Page 14 of 30
In the lower right-hand corner of the screen you will see the text E
XTENDED
, which you can tap to open a
menu with further, extensive setting options. The contents and functions of this menu are described
below in sections 3.3.4 - 3.3.8.
3.3.2
Protocol
In the P
ROTOCOL
menu you will find an
overview of the last 100 treatments
that were carried out with the cabin.
The entries are sorted by date and
each line contains all treatment-
relevant information such as the
spectrum of UV tubes used, dose and
treatment time. For treatments that
have not been completed, the
corresponding entry is shown in red.
To view older entries simply swipe
your finger from the bottom to the top
of the list area.
3.3.3
Info
In the I
NFO
menu you can see the
operating hours of the UV tube types
used. You will also find information
about the next required maintenance
date, as well as the software version
and IP address of the cabin.
With the T
UBE
C
HECK
button the UV
tubes can be switched on even with
the door open, so that their function
can be checked.
However, this is only
permitted with the use of
appropriate UV protective
equipment (UV protective eyewear, UV protective clothing and sunscreen with a high sun
protection factor). Always follow the safety instructions in section 2.3 of this manual.