U
SER
M
ANUAL
&
T
ECHNICAL
D
ESCRIPTION
N-LINEpro_User Manual_2018-09-20.doc
MEDlight GmbH
Werrestr. 94
32049 Herford
Germany
Phone: +49 5221 99429-0
Fax: +49 5221 99429-40
e-mail: [email protected]
www.medlight.eu
Page 11 of 30
3.2.2
Therapy Type
If the cabin is equipped with only one
UV tube type, this menu item is
omitted and you can proceed directly
to section 3.2.3.
For devices that are equipped with a
combination of UVA and UVB tubes,
you can select the desired type of
therapy in this menu. For a treatment
with UVA please press the UVA
B
UTTON
(as shown in this example) and for a
treatment with UVB press the UVB
button.
If a UVA and UVB treatment are to be
combined, swipe from right to left
over the screen or select C
OMBINED
T
HERAPY
by
tapping
on
the
corresponding menu tab.
In this menu, you can specify the order
in which the treatment should take
place. In the example shown, the UVA
treatment would be carried out first,
followed by the UVB treatment. For a
reverse order (UVB first, followed by
UVA), please push the lower of the
two selection buttons.
After you have made your settings for
a single therapy or a combined
therapy, please press the C
ONTINUE
button to go to the next menu item. If you want to switch back to the
previous menu (3.2.1), press the arrow button
←
in the upper left corner of the screen.
3.2.3
Dose or Time Input
In this menu you can set the desired
dose. To do this, first touch the input
field to open the numeric keyboard of
the touch screen. Now enter the
desired dose and press the enter key
(
) of the keyboard. Below the input
field, the expected treatment time is
now displayed and on the bottom
right of the screen a green C
ONTINUE
button appears.
In addition to the direct entry of a
dose, it is also possible to select a dose