MediSono P11 EXP, Руководство пользователя

Страница: 134 / 151

P11 EXP
Portable Digital Color Doppler Ultrasound System
13-8
To sterilize the probe
You should sterilize the intraoperative probe, biopsy use or blood contacting probe after
each use. Perform the steps as follows:
1. Clean the probe.
For details, refer to Section 14.1.3.
2. Sterilize the intraoperative probe as shown in Table 14.2 until recommended soak
period expires.
Note:
If you do not use the recommended sterilant, make up it as the manufacturera˛rs
instructions.
3. Rinse the probe with the running sterile water to remove the residual sterilant com-
pletely.
4. Dry the probe with a lint-free soft dry cloth.
Disinfectant Manufacturer
Active Ingre-
dient
Cidex
T M
Activated
Level of
Active
Ingredi-
ent Contact
Type
Contact
Period
Dialdehyde Solution
J&J Glutaraldehyde 2.4% Soak 10 hours
Table 14.2:
Recommended Method for Sterilization
14.1.5 Disinfecting and Sterilizing the Probe Cable
• Do not immerse the probe connector or handle into disinfectant or sterilant.
• To avoid potential disease transmission, you should wear medical sterile gloves and
protective goggle during the disinfection or serialization.
• Do not immerse the probe cable into alcohol or isopropyl alcohol at any concentration
for a long period. Avoid any contact with iodine or phenols.
Daily Disinfection
Perform the following steps to clean the probe cable.
1. Use a lint-free soft dry cloth dampened with mild soapy water to wipe the probe cable.
2. Perform the medium-level disinfection to the surface probe as shown in Table 14.3
until the recommended disinfection period expires.
Note:
If you do not use the recommended disinfectant, make up it as the
manufacturera˛rs
instructions.
3. Rinse the surfaces of the probe cable with the fresh running water to remove the
residual disinfectant completely.
4. Dry the probe cable with a lint-free soft dry cloth.