Sentinel 100 - Hardware Installation Guide
8
media5corp.com
Requirements
Location Requirements
To avoid premature aging of the unit, insure user security and facilitate access, upgrades and
maintenance, the following guidelines must be followed.
•
Install the Mediatrix unit:
•
on a standard 48.26 cm (19 in.) equipment rack
•
on a flat surface (desk, table, etc.)
•
Install the Mediatrix unit in a well-ventilated location where it will not be exposed to high
temperatures or humidity.
•
Storage temperature: -20 ºC to +70 ºC
•
Operating temperature: 0 ºC to +40 ºC
•
Humidity lower than 85 % and non-condensing
•
Do not install the Mediatrix unit in a location exposed to direct sunlight or near stoves or
radiators. Excessive heat could damage the internal components.
•
Unit should be positioned to be accessible for future upgrade, maintenance and
troubleshooting and where cables can be easily connected.
•
Maintain a minimum of 25 mm (1 in.) clearance around the unit.
•
Keep airflow around and through the vents of the unit clear of any obstruction.
•
Do not put books or paper on the unit.
Wiring Guidelines
These guidelines apply for any cable, supplied or not, used with a Mediatrix unit.
•
Always use straight through cables.
•
Cables must not pull or create a lateral stress on the connectors, i.e. they must be long enough.
•
Cables must be installed in such a way not to present a trip hazard to personnel working in the
vicinity of the equipment.
•
Keep cables away from:
•
Sources of electrical noise such as radios, transmitters, and broadband amplifiers
•
Power lines
•
Fluorescent lighting fixtures
