Media5 Sentinel 100 M Скачать руководство пользователя

Страница: 37 / 39

Sentinel 100 - Hardware Installation Guide

media5corp.com

Documentation

Mediatrix units are supplied with an exhaustive set of documentation.

Mediatrix user documentation is available on the

Documentation Portal

Several types of documents were created to clearly present the information you are looking for. Our

documentation includes:

•

Release notes

: Generated at each GA release, this document includes the known and solved

issues of the software. It also outlines the changes and the new features the release includes.

•

Configuration notes

: These documents are created to facilitate the configuration of a specific

use case. They address a configuration aspect we consider that most users will need to

perform. However, in some cases, a configuration note is created after receiving a question

from a customer. They provide standard step-by-step procedures detailing the values of

the parameters to use. They provide a means of validation and present some conceptual

information. The configuration notes are specifically created to guide the user through an

aspect of the configuration.

•

Technical bulletins

: These documents are created to facilitate the configuration of a specific

technical action, such as performing a firmware upgrade.

•

Hardware installation guide

: They provide the detailed procedure on how to safely and

adequately install the unit. It provides information on card installation, cable connections, and

how to access for the first time the Management interface.

•

User guide

: The user guide explains how to customise to your needs the configuration of

the unit. Although this document is task oriented, it provides conceptual information to

help the user understand the purpose and impact of each task. The User Guide will provide

information such as where and how TR-069 can be configured in the Management Interface,

how to set firewalls, or how to use the CLI to configure parameters that are not available in the

Management Interface.

•

Reference guide

: This exhaustive document has been created for advanced users. It includes

a description of all the parameters used by all the services of the Mediatrix units. You will find,

for example, scripts to configure a specific parameter, notification messages sent by a service,

or an action description used to create Rulesets. This document includes reference information

such as a dictionary, and it does not include any step-by-step procedures.

Содержание Sentinel 100 M








































Результаты поиска

Содержание Sentinel 100 M

Отзывы:

Похожие инструкции для Sentinel 100 M

Бренды по названию

Популярные бренды

Media5 Sentinel 100 M, Руководство по установке оборудования

Результаты поиска

Содержание Sentinel 100 M

Отзывы:

Похожие инструкции для Sentinel 100 M

Бренды по названию

Популярные бренды