Medha MAS 696 Скачать руководство пользователя | Manualshive

Страница: 28 / 67

background image

Chapter 5 - Electrical Control Cabinets

Medha Servo Drives Pvt Ltd.

28

14.

DCL 1 to 6 Circuit Breakers:

This 10A circuit Breaker protects the

DC LINK contactor Motor and control circuits.

15. A safety guard over the Breaker lever helps to prevent accidental

operation. 6 Nos of DCL Circuit Breakers are provided for individual
DCL Motor control.

16.

TC 1 COMPTR TO TC 6 COMPTR Circuit Breakers:

This 10A

Circuit Breaker provides power and protection to Traction
Computer#1 to #6 and associated circuits. A safety guard over these
Breakers are provided to prevent accidental breaker operation.

17. GEN FIELD. Circuit Breaker:

This 90A Circuit Breaker protects the

Traction Alternator Field circuit. The Companion Alternator supplies
Traction  Alternator  Field  Excitation  current  through  Silicon
Controlled Rectifiers (SCR's). The GEN. FLD. Breaker protects the
SCR's,  Traction  Alternator,  Companion  Alternator  and  other
associated  circuitry.  If  the  TA  field  current  overload  occurs,  the
Breaker  trips  and  the  Locomotive  Computer  Displays  the
Message:

“Main Gen. Field Circuit Breaker is tripped under load”

18.

TCC BLOWER 1 to TCC BLOWER 6 Circuit Breakers:

This 30A

Circuit Breaker protects the Traction Inverter Blower Motor and
associated circuit.

19.

GROUND CUTOUT Switch:

This Toggle switch, when open,

disconnects  ground  protection  sensors  (Ground  leakage  current
sensors  PGND  MG,  VE,  PGNDPI-VE,  PGNDG1,
PGNDG2,  PGNDTI1-6)  from  Locomotive  electrical  circuits  for
maintenance inspection or troubleshooting. When switch is open, the
LCC  prevents  TA  excitation.  This  switch  is  normally  locked  in  the
closed position by a pin that is safety-wired to bracket. This setting
arms the ground fault protection.

5.6 Test Panel

Test panel jacks provided on the Circuit Breaker panel,
enable Maintenance personnel to conveniently check the
following voltages:

1.  Main Generator (Traction Alternator) Field voltage
2.  Companion Alternator Output voltage
3.  Load Regulator voltage
4.  Loco  Battery  voltage  (Battery  Positive-Battery

Negative)

Fig. 5.9 Test Panel

«
...
26
27
28
29
30
...
»

Содержание MAS 696




































































Отзывы:

Нет отзывов

Похожие инструкции для MAS 696

Бренд: EAE Страницы: 36

Бренд: 2gig Technologies Страницы: 4

Бренд: 2gig Technologies Страницы: 2

Бренд: G1SLE Страницы: 2

Бренд: FAAC Страницы: 32

Бренд: Sanhua Страницы: 3

Бренд: rav Страницы: 120

Бренд: ZKTeco Страницы: 13

Бренд: UniPi Technology Страницы: 4

Бренд: Bardiani Страницы: 96

Бренд: Eaton Страницы: 4

Бренд: PUTCO Страницы: 2

Бренд: Nemesis Страницы: 6

Бренд: I-Tork Страницы: 15

Бренд: MGC Страницы: 16

Бренд: Samson Страницы: 102

Бренд: XtendLan Страницы: 12

Бренд: ZBA Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды