Mean Well SHP-10K-115, Руководство по установке

Страница: 26 / 33

45
◎
FAULT_STATUS (0x0040) ：
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
Low byte
OVP OTP FAN FAIL _ OP_OFF AC_FAIL SHORT OLP HI_TEMP
Bit _ ：Fan locked flag 0 FAN FAIL
0 working normally ＝Fan
1＝Fan locked
Bit 1 OTP： Over temperature protection
0＝ Internal temperature normal
1＝ Internal temperature abnormal
Bit 2 OVP：Output over voltage protection
-
0＝ Output voltage normal
1＝Output over voltage protected
Bit 3 OLP： Output over current protection
0＝ Output current normal
1＝ Output over current protected
-
Bit 4 SHORT：Short circuit protection
0＝Shorted circuit do not exist
1＝Shorted circuit protected
Bit 5 AC_FAIL：AC abnormal flag
0＝
AC range normal
1＝ AC range abnormal
Bit 6 OP_OFF： DC status
0＝DC turned on
1＝DC turned off
Bit 7 HI_TEMP：Internal high temperature protection
0＝
Internal temperature normal
1＝ Internal temperature abnormal
: Unsupported settings displays with "0" Note
6
46
0x4D
0x50
0x4C
0x30
0x45
0x48
0x4C
0x30
0x41
0x50
0x20
0x2D
0x4E
0x2D
0x20
0x32
0x57
0x33
0x20
0x34
0x45
0x35
0x20
0x20
◎
MFR_ID_B0B5 (0x0080 - 0x0082) is the first 6 codes of the
manufacturer's name (ASCII); MFR_ID_B6B11(0x0083 - 0x0085) is the
last 6 codes of the manufacturer's name (ASCII)
EX: manufacturer's name is MEANWELL → MFR_ID_B0B5 is MEANWE；
MFR_ID_B6B11 is LL
◎
MFR_MODEL_B0B5 (0x0086 - 0x0088)is the first 6 codes of the
manufacturer s model name ' (ASCII); MFR_MODEL_B6B11(0x0089 -
0x008B) is the last 6 codes of the manufacturer s model ' name (ASCII)
EX: Model name is SHP-10K-55 → MFR_MODEL_B0B5 is ； SHP 10 -
MFR_MODEL_B6B11 is K 55 -
Byte 0
Byte 0
Byte 0
Byte 6
Byte 1
Byte 1
Byte 1
Byte 7
Byte 2
Byte 2
Byte 2
Byte 8
MFR_ID_B0B5
MFR_MODEL_B0B5
MFR_ID_B6B11
MFR_MODEL_B6B11
Byte 3
Byte 3
Byte 3
Byte 9
Byte 4
Byte 4
Byte 4
Byte 10
Byte 5
Byte 5
Byte 5
Byte 11
◎
MFR_REVISION_B0B5 (0x008C - 0x008E) is the firmware revision. A
range of 0x00 hexadecimal (R00.0)~0xFE (R25.4) represents the
firmware version of an MCU; 0xFF represents no MCU existed
EX: The supply has two MCUs, the firmware version of the MCU number
1 is version R25.4 (0xFE), the MCU number 2 is version R10.5 (0x69)
6