Mean Well SHP-10K-115, Руководство по установке

Страница: 13 / 33

19
4. .2 2 Pin Assignment of CN53
2 1
10 9
-V(Signal) -V(Signal)
PV+ PV+
DB DB
DA DA
PC+ PC+
9
1
10
2
4. . CN 2 3 86 Pin Assignment of
GND-AUX GND-AUX
DC-OK
AC-OK
SCL/CANL/
DATA-
SCL/CANL/
DATA-
SDA/CANH/
DATA+
SDA/CANH/
DATA+
+12V-AUX +12V-AUX
GND-AUX
GND-AUX
GND-AUX
GND-AUX
T-ALARM
+5V-AUX
Remote
ON-OFF
Fan Fail
2
18
1
17
17 18
1 2
Pin No.
1,2
3,4
5,6
7,8
9,10
Function
-V(Signal)
PV+
PC+
DB
DA
Description
Negative output voltage signal. It is for local sense and certain
function reference; it cannot be connected directly to the load.
Connection for output voltage programming. (Note)
Connection for constant current level programming. (Note)
Differential digital signal for parallel control. (Note)
Note: Non-isolated signal, referenced to [-V(Signal)].
4
20
1
2
3
4,6,8,10
11,12
13,14
5
15,16
17,18
7
9
Remote
ON-OFF
+5V-AUX
T-ALARM
GND-AUX
Fan Fail
+12V-AUX
GND-AUX
DC OK
AC OK
SCL
SDA
CANL
CANH
DATA-
DATA+
The unit can turn the output ON/OFF by dry contact between
Remote ON/OFF and +5-AUX.(Note)
Short (4.5 ~ 5.5V) : Power ON ; Open(0 ~ 0.5V) : Power OFF ;
The maximum input voltage is 5.5V
High (3.5 ~ 5.5V) : When the internal temperature exceeds
the limit of temperature alarm.
Low (-0.5 ~ 0.5V) : When the internal temperature is normal.
The maximum sourcing current is 10mA and only for output.(Note)
The maximum sourcing current is 10mA and only for output.(Note)
The maximum sourcing current is 10mA and only for output.(Note)
The maximum sourcing current is 10mA and only for output.(Note)
Auxiliary voltage output, 4.5~5.5V, referenced to GND-AUX
(pin 4,6,8,10,17,18) only for Remote ON/OFF used. This output
is not controlled by the Remote ON/OFF control.
High(3.5~5.5V):When the fan fail.
Low(-0.5~0.5V):When the fan works normally.
High(3.5 ~ 5.5V) : When Vout 80% 6%. ≦ ±
Low(-0.5 ~ 0.5V) : When Vout 80% 6% ≧ ±
.
High (3.5 ~ 5.5V): When AC input 335 1.5%Vac, PSU works normally. ≧ ±
Low (-0.5 ~ 0.5V): When AC input 320 1.5%Vac, PSU shut down. ≦ ±
Auxiliary voltage output GND.
The signal return is isolated from the output terminals (+V & -V).
For PMBus model: Serial Clock used in the PMBus interface.(Note)
For PMBus model: Serial Clock used in the PMBus interface.(Note)
For CANBus model: Data line used in CANBus interface.(Note)
For CANBus model: Data line used in CANBus interface.(Note)
For MODBus model: Data line used in MODBus interface.(Note)
For MODBus model: Data line used in MODBus interface.(Note)
Auxiliary voltage output, 11.4~12.6V, referenced to
GND-AUX (pin17 & 18).
The maximum load current is 1A. This output is not controlled
by “Remote ON-OFF”.
Auxiliary voltage output GND.
The signal return is isolated from the output terV & -V).
Note: Isolated signal, referenced to (GND-AUX).
Pin No. Function Description
4