49
If the table shows below, it means that your RJ-45 cable is not
connected properly or the IP address you set is incorrect
.
5.2.3 How to
pen the
eb age
O
W
P
Connect your PC to the CMU2, then open a blank page and type
the IP address of the CMU2 in the address bar. If you are not sure
the IP address of the CMU2, refer to the touch panel interface.
The route is 〝Setting〞 → 〝System〞 → 〝Network〞. (Default
IP: 169.254.1.1)
5
50
5.2. H
4
OME
5.2. S
5 TATUS
5.2.5.1 PSU Status
The
page of the built-in web displays output power, number
HOME
of PSU connected, bus votage, total current, information on
firmware versions. Users can enter other pages by clicking the
menu bar, located in the top-right corner
.
S
page displays status of PSUs, digital I/O and relays.
TATUS
PSU Status page displays information of address number,
power wattage, current, temperature, model name, serial
number, firmware version, alarm and online status.
5
