27
I/O signal
displays digital status of inputs and outputs.
page
There
5 channels each.
are
5.1.2.2 I/O signal
I/O signal
- options
page
The following functions are available in the I/O signal
:
page
No.
1
2
Name
Digital input
status
Digital output
status
Description
There are 2 conditions, it displays green
when logic high whereas it displays gray
when logic low. It remains logic high when no
signal connected due to hardware design.
There are 2 conditions, it displays green
when the trigger condition is met whereas it
displays gray when the trigger condition is
NOT met.
5
28
The relay
is used to display output state and setting
page
parameters of the four programmable relays.
Relay
options
page–
The following functions are available in the Relay
:
page
There are up to 285 permutations according to different trigger
conditions. Trigger selection is shown as below:
5.1.2.3 Relay
There are 2 status, if the trigger condition is met, it will display
NO ( ormal
pen), the icon is COM connected to NO; if the
N
O
trigger condition is not met, it will display NC ( ormal lose),
N
C
the icon is COM connected to NC
Alarm
Any, OVP, Short, OTP,
AC-Fail, Fan Lock
Immed., 1Sec,
5Sec, 10Sec,
30Sec, 1~10Min
Trigger
Delay
PSU
ON, OFF
DI CH1 DI CH5
–
High, Low
5
