Page 49
Warranty
optoNCDT ILR 1181 / 1182
12.
Warranty
All components of the device have been checked and tested for perfect function in the factory. In the unlikely
event that errors should occur despite our thorough quality control, this should be reported immediately to
MICRO-EPSILON. The warranty period lasts 12 months following the day of shipment. Defective parts, except
wear parts, will be repaired or replaced free of charge within this period if you return the device free of cost to
MICRO-EPSILON.
This warranty does not apply to damage resulting from abuse of the equipment and devices, from forceful
handling or installation of the devices or from repair or modifications performed by third parties. No other
claims, except as warranted, are accepted. The terms of the purchasing contract apply in full.
MICRO-EPSILON will specifically not be responsible for eventual consequential damages.
MICRO-EPSILON always strives to supply the customers with the finest and most advanced equipment.
Development and refinement is therefore performed continuously and the right to design changes without
prior notice is accordingly reserved.
For translations in other languages, the data and statements in the German language operation manual are
to be taken as authoritative.
13.
Service, Repair
In the event of a defect on the sensor please send
us the affected parts for repair or exchange stating
the conditions in which it has operated (applica-
tions, conditions and environmental conditions).
In the case of faults the cause of which is not clear-
ly identifiable, the entire measuring system must be
sent back to:
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Str. 15
94496 Ortenburg / Germany
Tel. +49 (0) 8542/ 168-0
Fax +49 (0) 8542 / 168-90
www.micro-epsilon.com
