Page 9
Safety
optoNCDT ILR 1181 / 1182
1.4
Proper Use
- The sensors are be used for
displacement measurement
for special measuring functions
- The measuring system may only be operated within the limits specified in the technical data, see Chap.
3.
- The sensors may only be used in such a way that does not endanger persons or cause damage to the
machine due to malfunctions or total failure of the sensor.
- Additional precautions for safety and damage prevention must be taken for safety-related applications.
1.5
Proper Environment
- Protection class:
IP 65
- Operating temperature: -10 to +47 °C (+14 to +116.6 °F)
- Storage temperature:
-20 to +70 °C (-4 to +158 °F)
- Humidity:
< 65 % (no condensation)
- Ambient pressure:
atmospheric pressure
2.
Laser Class
The optoNCDT ILR 1181-30/1182-30 sensors operates with a wavelength of 650 nm (visible, red). The
maximum optical output is ≤
1 mW. The sensors are classified in Laser Class 2 (Class II).
Class 2 (II) lasers are not notifiable and a laser protection officer is not required either.
The housing of the optical sensors may only be opened by the manufacturer. For repair and service purposes
the sensors must always be sent to the manufacturer.
The laser warning labels for Germany have already been applied. Those for other non German-speaking
countries an IEC standard label is included in delivery and the versions applicable to the user‘s country must
be applied before the equipment is used for the first time.
The following warning label is attached on the sensor housing (top side):
